by Bart McNeil
One sometimes sees "4 WHEEL DRIVE" stenciled on the tailgates of civilian Jeeps. Catalogues sell two versions of the stencil and they do not agree on which stencil is to be used on what year and model Jeep. This article will attempt to create guidelines for correct stencil use based on period photographs and remaining examples of unrestored Jeeps.
This is not an easy task because about 95% of period and modern published photos are front, 3/4 front, and side views. There are very few clear rear views of unrestored Jeeps. Another problem is that serious interest in Jeep history is fairly recent, and often Jeeps in published photos are not identified, misidentified or shown with non-original components, and altered vehicles are offered as original. An author, in his enthusiasm, may not know he has made a mistake and therefore unknowingly perpetuates incorrect information about the vehicle shown. Other publications may have good descriptive photographs but fail to identify them as to date.
Note: click most of the detail photos here to see full versions of the photos (50K JPEG's).
This drawing number 668718, originally done on 16 April 1947, shows the precise location of the stencil on the tailgates of CJ-2A and 4T pickup truck models. The drawing is related to Engineering Release 3069 which was headed "Name - Tail Gate - Addition of Identification Stencil," and notes that the stencil was Released for Production on 5 June 1947.
The location is specified for the CJ-2A as 1-1/2 inches above the "L" rib on the right side of the tailgate (X), and 1-9/16" left of the right outside edge (Y). Dimensions for the 4T truck are 3-3/8" from the bottom, 2-1/8" from the right.
See the full drawing (70K GIF) including the 4T truck tailgate and half-scale detail of the stencil.
This is an owner-identified 1947 CJ-2A tailgate with the original "4 WHEEL DRIVE" stencil. Given the above information we know it is from the second half of 1947.
This photo shows the tailgate of Joe Caprio's 1951 CJ-3A, including most of the early stencil.
An illustration from the 1956 CJ-3B Parts List includes (barely visible behind the tailgate chain) the stencil on the tailgate of an early CJ-3B.
Lawrence Wade's 1955 CJ-3B sports an immaculate original paint job with factory stenciled "4 WHEEL DRIVE". And yes folks, that is an original taillight.
The most recent example of the first stencil's use I've found is on this virtually untouched 1956 CJ-5, which spent 30 years in an upstate New York barn. Mark Sinclair, its current owner, dragged it into the light of day. Things have rusted off, but they were never replaced, so anything on the Jeep is from its year of purchase. You may notice that this is the first civilian Jeep tailgate stencil we've found to be painted in anything other than white or black. Here the light green stenciled paint creates an interesting contrast with the darker green. It is quite a bit more subtle than anything we've found on earlier CJ's, and perhaps illustrates Kaiser-Willys' efforts to "pretty up" the CJ-5 while leaving the 3B to be the reliable old workhorse, "always the bride's maid, but never the bride."
Exactly when the first stencil was discontinued in favor of the second version is currently a matter of conjecture, because good period photos or drawings have not surfaced. Observation of existing examples suggests approximately 1955.
Shortly after the introduction of the CJ-5, Kaiser-Willys may have decided to modernize the stencil by increasing the size of the "4", moving it to the left side and eliminating the horizontal lines top and bottom. This may be consistent with the CJ-5's claim to being "STREAMLINED". Their ads tout it as a much improved and attractive vehicle, so the redesign of the stencil at about this time would make a certain amount of sense.
This is a detail of a 1955 CJ-5 advertisement found in Jeep 1942-86 by Walter Zeichner.
Walck's Four Wheel Drive price list for CJ-3B's lists the first stencil in use through 1953, and the second stencil from 1954 through 1964. The change to the second stencil corresponds roughly to the introduction of the CJ-5 in 1955, but the above Kaiser-Willys factory photo suggests that the changeover date was late 1955 or slightly later.
The Beachwood Catalogue offers the change to the second stencil as the beginning of the CJ-3B in 1952. We know that is inaccurate from the above photos.
I would guess that the change to the second stencil occurred in the 1956 model year, but have no proof as to the exact date. Making matters more difficult is the fact that not all CJ's had a stencil; perhaps most did not.
The revised stencil style can be seen on the tailgate of Steve Chabot's unrestored 1959 CJ-3B, left, and Michael Perry's unrestored 1959 CJ-5, right.
The latest CJ-3B I know of with a stencil is from 1963, left. The most recent example of the second stencil I have found on any Jeep is this service manual photo of a CJ-5A Tuxedo Park, right, which would date from 1964 or later.
Although we know that it is unlikely that stencils were used on CJ-3B's between 1964 and 1968 (see John Briggs' 1963 CJ-3B, 60K JPEG) the stencil may have been used on CJ-5's of that period and up to 1970 when this style tailgate was replaced by the oversized "Jeep" stamping on the tailgate from 1971 to 1982.
(As of 2013, we have received this photo from Jim Campbell of the stencil on a 1970 CJ-5 built in October 1969. -- Derek)
This factory chart dated 1960 shows stencil designs and reveals part numbers, dimensions, application, and location, for all vehicles including the Forward Control trucks. This primary evidence should settle any argument on the proper stencil and its location on the tailgate. For the Universal Jeep, "center of tail gate right panel" means equal margins on sides and equal margins top and bottom. Some might disagree with the aesthetics of that location but these are the factory specifications.
This paste-up of drawings and text was apparently intended for printing a factory stencil instruction sheet which went out to dealers with Kaiser Parts and Accessories Bulletin No. D-18 (20K GIF) in May 1960. The part numbers shown are not included in the published 1956 or 1962 Parts Lists. Thanks to Keith Buckley for scanning Bulletin D-18, which shows the list price of the complete "Kit, Insignia Stencils" as $2.95.
The chart clarifies that stencil "C" (with Jeep over 4 WHEEL DRIVE) was used on the Utility Wagon and Utility Delivery wagon, not on the Universal Jeep. Another interesting point is that Jeep is in quotation marks on the Forward Control models. Perhaps the FC was so odd-looking that Kaiser had to remind folks that a Forward Control really is a "Jeep".
The chart is courtesy of the Historic Civilian Jeeps Collection of Jim and Peg Marski. See a larger copy (150K JPEG).
The use of "4 WHEEL DRIVE" stencils on Jeep trucks roughly parallels their use on CJ's. See the 1947 drawing (70K GIF) showing the location on the 4T truck tailgate. Here is a 1954 fire truck from Hartwick, NY with original paint and early-style stencil.
Rick Grover of Arizona sent an interesting addition to our survey of stencils: "There is a never-repainted mid-50's truck in a junkyard 40 miles from here that had "WILLYS" in white in the center of the tailgate. This replaced the WO logo that was stamped into the metal until Kaiser bought Willys. Over on the right side is the 4 WHEEL DRIVE. Dan Kravitz's 1955 truck has a faithful reproduction of this stencil."
This is the most aggressive use of the WILLYS logo we have seen, dwarfing the second 4 WHEEL DRIVE stencil.
This is the version of the second stencil with "Jeep" atop, seen in an advertisement on page 84 of Foster's The Story of Jeep. It is barely visible on the tailgate of a one-ton truck but the date of the ad is not given. My guess would be about 1961.
This is also the "Jeep" version. The stencil is seen here on the tailgate of a station wagon, in Jim Allen's Illustrated Buyer's Guide: Jeep, andI am assuming that this stencil is original on this station wagon. A frame from the 1963 movie It's a Mad Mad Mad Mad World (40K JPEG) with
Terry Thomas and Milton Berle, also shows a station wagon with the "Jeep" version of the stencil.
On this circa-1957 Forward Control FC-150, the "4 WHEEL DRIVE" is in slightly different form with the "WHEEL DRIVE" on straight base lines, as seen in the chart above. On the left rear the word "Jeep" in ultra-bold Roman lettering precedes "FORWARD CONTROL".
I believe most or all vendors (see Parts Sources on the CJ3B Page) are selling stencils for the two logos as shown in this illustration from the Beachwood Canvas catalogue. A word of caution on the using the second stencil: the logo "Jeep" is seen on its own line in very bold lettering above "4 WHEEL DRIVE", for use on trucks or station wagons. To be correct on any CJ the "Jeep" logo on top should be masked off on the stencil so only the "4 WHEEL DRIVE" section is used. -- Bart McNeil
Dave Miles produced a vector-based version of the early stencil, using the blueprint at the top of this page and creating a cleaned up file with AutoCAD. Download an Adobe Acrobat PDF file (12K) of the new drawing. He says, "I scaled the drawing to an original stencil I found on my 50 CJ-3A. The PDF file allows anyone to print out an exact size copy (on letter size paper)."
Mike Perry created a stencil by hand (right) to reproduce the lettering on his 1959 CJ-5 after repainting, and has made the pattern available here for download by those who might want to cut their own stencil. Mike says, "I had a sign painter friend paint mine with "Sign Painters Paint - Gloss Black" using a brush (30K JPEG). I'm sure that one could use any enamel spray paint as well." See a printable actual size version of the stencil (12K GIF).
Note: Frank Sanborn says, "I have a computer file of the stencil for my CJ-2A -- it has the 4 above the "wheel drive" and a couple of horizontal lines. I also have a file to cut vinyl to fit the embossed "WILLYS" on hoods and tailgates (but not the grilles of 3B's), and a file to cut the "Jeep" logo for the tailgates of later Willys pickups." If you're interested in stickers for any of those logos, contact Frank at email@example.com.
Thanks to Jim Marski and everybody who offered information on their own tailgates, especially to Lawrence Wade, Jim Allen, Simon Bruton and Michael Perry. Thanks to Bart for collecting the history of the stencils. -- Derek Redmond
Return to Tech Tips on The CJ3B Page.
CJ3B Home | Site Map | Updates | Search | Links | Bulletin Board